Sommario   Guida in linea MOBOTIX Lingua: en  

Color Settings

Open the Color Settings dialog to adjust the color settings of the image sensors in order to optimize the camera for the lighting that is available.

Note:


Description of Parameters

Color Profile

Under certain light conditions, the display of white may vary. White balance is used to correct this kind of color variation.

Select one of the following profiles for white balance:

Auto The factory default setting Auto should produce the best results with most applications.
Neontube When the Auto setting does not deliver satisfactory results where fluorescent lamps are used, try using the Neontube profile for white balance.
Cloudy When the Auto setting does not deliver satisfactory results in settings with a very cloudy sky, try using the Cloudy profile for white balance.
Sunny When the Auto setting does not deliver satisfactory results at times of glaring sunlight, try using the Sunny profile for white balance.
Color Saturation Color saturation controls the color intensity. The higher the saturation, the more intense are the colors.
Values: -10 .. 0 .. 10

The recommended factory default setting is 5. The value -10 causes an image to be displayed as a grey-scale image.

Blue balance Controls the blue channel of the image.
Red balance Controls the red channel of the image.

The current color settings of the image sensors are displayed in the lower part of the dialog.


Storing the Configuration

Click on the Set button to activate your settings and to save them until the camera is rebooted.

Click on the Close button to close the dialog. While closing the dialog, the system checks the entire configuration for changes. If changes are detected, you will be asked if you would like to store the entire configuration permanently.

Altre lingue: en, it

©2001-2017 MOBOTIX AG, Germany · http://www.mobotix.com/