Sommario   Guida in linea MOBOTIX Lingua: en  

The HTTP API

The HTTP API (Application Programming Interface) is a software interface to the camera and allows to conveniently integrate the camera into a centralized management system. The interface consists of two CGI scripts that can be called with parameters and values using HTTP commands. By means of these scripts, you can modify the settings of the Setup submenus and execute certain camera functions.

Modifying the Settings of the Setup Menu

Using the HTTP command http://192.168.1.100/control/control, you can modify the settings of the Setup menu.

Executing Camera Functions

Using the HTTP command http://192.168.1.100/control/rcontrol, you can execute certain camera functions.

Important: Certain functions for Saving and Restoring the configuration can only be performed by a user of the admin access level. In this case, you need another HTTP command for calling the rcontrol script, namely:
http://192.168.1.100/admin/rcontrol

Command Conventions

Command With one Instruction

If you would like to use the list instruction with the control command, you need to separate the instruction from the command using a ?:
   http://192.168.1.100/control/control?list

Command With one Instruction and a Parameter/Value Pair

In order to execute an instruction with a parameter, the instruction needs to be separated from the parameter by an ampersand &. The parameter value is separated by a = sign.
   http://192.168.1.100/control/control?list&section=action

Command With one Instruction and Several Parameter/Value Pairs

If you would like to use multiple parameters, separate them using an ampersand &:
    http://192.168.1.100/control/rcontrol?action=ledson&time=5

Several Values for one Parameter

For some parameters you need to enter two values in order to address both lenses. These parameters are shown as having two default values (e.g. 0 0). In the http command, you will need to separate these values using a + sign :
   http://192.168.1.100/control/control?set&section=general&sharpen=0+0

Newline characters in commands

If you would to use one or more newline characters in a command (e.g. to set several video motion window definitions), you need to replace the newline characters using the CGI replacement string %0A.    http://192.168.1.100/control/control?set&section=general&
    coverimage_area=0,540,380,200,200,2%0A1,320,100,100,150,2

Special Characters in Commands

In order to display the CGI formatting strings themselves (newline, blank, umlauts, ...), enter the URL-encoded characters. To do this, enter a % sign followed by the hex value of the character you would like to display. The following table contains a list of the most common characters:

Character URL-Encoding Character URL-Encoding Character URL-Encoding
(Newline) %0A (Blank) %20 or + % %25
& %26 + %2B = %3D
? %3F © %A9 ® %AE
ß %DF ä %e4 Ä %c4
ö %F6 Ö %D6 ü %FC
Ü %DC Ç %c7 à %e0
á %e1 â %E2 æ %E6
ç %E7 è %E8 é %E9
ê %EA ë %EB î %ee
ï %EF ô %F4 ù %F9
ú %FA ù %FB û %fc

Table of Color Values

You may specify color values for certain parameters. These values correspond to the hex values of the red, green and blue (RGB) values of a specific color. Two characters each represent on color, 00 represents the lowest value (no color), FF represents the highest value (full color). As the colors are mixed additively, 0x000000 will be black and 0XFFFFFF will be white.

Example:
0xFF0000 Red
0x00FF00 Green
0x0000FF Blau

Color name Hexadecimal notation Color Color name Hexadecimal notation Color
Black 0x000000   Maroon 0x800000  
Dark green 0x008000   Olive 0x808000  
Marine 0x000080   Purple 0x800080  
Teal 0x008080   Dark gray 0x808080  
Light gray 0xC0C0C0   Red 0xFF0000  
Green 0x00FF00   Yellow 0xFFFF00  
Blau 0x0000FF   Magenta 0xFF00FF  
Cyan 0x00FFFF   White 0xFFFFFF  

The control Command

First of all, you need to tell the camera which instructions are to be performed.

Instructions for the control Command

Instruction Description
set Write access to the image settings. Use this instruction to modify the image settings.
http://192.168.1.100/control/control?set
read Read access to the image settings. Use this instruction to query information about the image settings.
http://192.168.1.100/control/control?read
list

The list instruction returns a list of the configuration file sections that can be modified.
To retrieve the parameters of one particular section, add section=<sectionname> at the end of the call.

Example:
http://192.168.1.100/control/control?list&section=action lists all options of the action section.

This command allows reading the current values and it provides a method for obtaining the options and the texts of the user interface by other applications.

factory The factory instruction allows you to reset the parameters of a section to the factory default settings. This call requires the section name section=<sectionname> as additional parameter.
http://192.168.1.100/control/control?factory&section=<sectionname>
restore The restore instruction allows you to reset the parameters of a section to the values stored in the flash memory. This call requires the section name section=<sectionname> as additional parameter.
http://192.168.1.100/control/control?restore&section=<sectionname>


List of Available Sections

The sections shown in the following tables correspond to all dialogs that you can control remotely using the control command. Click on one of the following links to go to the corresponding section.

The imagecontrol section
The eventcontrol section
The exposurecontrol section
The general section
The exposure section
The color section
The jpeg section
The text section
The settings section
The event section
The eventfilter section
The recording section
The action section
The message section
The message2 section
The signalout section
The mxpegparam section
The quickcontrol section


Parameters for the imagecontrol Section

Enter the following command to see all parameters for this section:
http://192.168.1.100/control/control?list&section=imagecontrol

Parameter Name in Dialog Possible Values Default Value(s)
Camera Selection
camera Camera Selection right, left, auto auto
Camera Night Switch (DY/NI)
nightswitch Night Camera Level 3, 6, 10, 185, 32, 56, 100, 170, 320, 560, 1000, 1800, 3200 100
nightswitchdelay Night Switch Delay 0, 1, 2, 3, 4, 5, 7, 10, 15, 20, 25, 30 5
Image Size
size Image Size 160x120, 320x240, 640x480, 1280x960, customize, 640x240 640x480
customsize Custom Size (String constant) 800x400
Digital Zoom
zoomlock Zoom Lock disable, enable disable
panlock Pan Lock disable, enable disable
panpos Pan Position (String constant) 0,0
Frames per Second
framerate100 Frame Rate 0, 2500, 2000, 1600, 1400, 1200, 1000, 800, 600, 400, 300, 200, 100, 50, 25, 10 2500
Mirror & Rotate Image
mirror Mirroring no, vertical, horizontal, both no no
rotate Rotation 0, 180 0 0
Sharpness
sharpen Sharpness 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10 4 4
Noise Suppress
darknoisesuppress Noise Suppress off, low, medium, high low low
Automatic Contrast
automatic Automatic Contrast off, auto auto auto
Brightness
brightness Brightness -10, -9, -8, -7, -6, -5, -4, -3, -2, -1, 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10 0 0
Backlight Correction
backlight Backlight -10, -9, -8, -7, -6, -5, -4, -3, -2, -1, 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10 4 4
Color Profile
colorprofile Color Profile auto, Neontube, Cloudy, Sunny, Outdoor auto
Color Saturation
color Color Saturation -10, -9, -8, -7, -6, -5, -4, -3, -2, -1, 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10 0 0
Blue Balance
blue Blue Balance -10, -9, -8, -7, -6, -5, -4, -3, -2, -1, 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10 0 0
Red Balance
red Red Balance -10, -9, -8, -7, -6, -5, -4, -3, -2, -1, 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10 0 0
MxPEG
motionjpeg MxPEG disable, enable enable
mxpeg_cyclic Cyclic Image Refresh 0 .. 100 8
mxpeg_delta Delta of Change 0 .. 100 0
mxpeg_minchange Minimum MCU Change 0 .. 100 10
mxpeg_sw2full Switch to Full Image 0 .. 100 60
JPEG Quality
quality JPEG Quality 10, 20, 30, 40, 50, 60, 70, 80, 90 70
JPEG User Comment
jpegcommentuser JPEG User Comment (String constant)  
JPEG Comment Text (CT)
jpegcomment_ctx Comment Text Rows 0 .. 16 1
Comment Text Length
jpegcomment_ctlen Comment Text Length 64 .. 2048 256
Text Display
textdisplay Text Display disable, enable, datetime enable
textbgcolor Background Color 0x000000, 0x800000, 0x008000, 0x808000, 0x000080, 0x800080, 0x008080, 0x808080, 0xC0C0C0, 0xFF0000, 0x00FF00, 0xFFFF00, 0x0000FF, 0xFF00FF, 0x00FFFF, 0xFFFFFF 0x000000
textbgopacity Background Opacity 0, 25, 50, 75, 100 0
date Date and Time 0, 1, 2, 3, 4, 5, 6 1
print Comment (Multiline string constant) WWW.MOBOTIX.COM
errortext Error Messages 0, 1 1
stitchmode Cover Borders off, left_top left_top
Obscure Image Area (OA)
coverimage Obscure Image Enable enable, disable disable
coverimage_timetable Obscure Image Time Table (No value), Weekdays_Mo-Fr, Weekend_Sa-So, Opening_Times, Closing_Times, MyCustomTimes  
coverimage_area Obscure Image Area (Multiline string constant) 0,540,380,200,200,2

Parameters for the eventcontrol Section

Enter the following command to see all parameters for this section:
http://192.168.1.100/control/control?list&section=eventcontrol

Parameter Name in Dialog Possible Values Default Value(s)
Passive Infrared Detector (PI)
pircheck PIR Enable 1, 0 0
pir PIR Level 0 .. 100 50
Video Motion Window (VM)
motioncheck Video Motion Enable 1, 0 1
motion Video Motion Definitions (Multiline string constant) 0,540,380,200,200,20,25
motionwintype Video Motion Style off, on, highlight, passiv highlight
motionnightoff Video Motion Night Mode 0, 3, 6, 10, 18, 32, 56 0 0
Microphone (MI)
miccheck Microphone Enable 1, 0 0
mic Microphone Level 0 .. 100 50
micwidth Microphone Signal Width 50, 100, 150, 200, 250, 300, 400, 500, 750, 1000, 2000 50
Signal Input (SI)
inputswitch Signal Input off, close, open off
Signal CTS (SC)
inputcts Signal CTS off, close, open off
Signal DSR (SR)
inputdsr Signal DSR off, close, open off
Signal RxD (SX)
inputrxd Signal RxD off, close, open off
Periodic Event (PE)
timercheck Periodic Event Enable 1, 0 0
timerunit Periodic Time Unit sec, ms, Hz sec
timer Periodic Time Interval 0 .. 86400 60
Time Task (TT)
timetaskcheck Time Task 1, 0 1
User Click (UC)
userclick User Click 1, 0 1
Recording Begin (RB)
recbegincheck Recording Begin 1, 0 0
Recording End (RE)
recendcheck Recording End 1, 0 0
Recording History (RH)
rechistcheck Recording History 1, 0 0
Recording Terminate (RT)
rectermcheck Recording Terminate 1, 0 0
Buttons (BT)
buttoncheck Buttons Enable 1, 0 0
button Button Combination right, left, rightORleft, rightANDleft right
IR Remote Control (IR)
ircheck Remote Control Enable 1, 0 0
ircode Remote Control Code 0 0
IP Receive (RC)
ipreceivecheck IP Receive Enable 1, 0 0
ipreceiveport IP Receive Port 1 .. 65536 8000
ipreceivematch IP Receive Compare strcmp, regex strcmp
ipreceivemessage IP Receive Message (String constant)  
COM In (CI)
comincheck COM In Enable 1, 0 0
cominmatch COM In Compare strcmp, regex, binary strcmp
cominmessage COM In Message (String constant)  
Temperature (TP)
tempcheck Temperature Enable 1, 0 0
tempsource Temperature Sensor intern intern
tempcompare Temperature Compare higher, lower higher
templevel Temperature Level (String constant) 50.0
tempunit Temperature Unit Celcius, Fahrenheit Celcius
tempaction Temperature Action first, every first
Illumination (IL)
illucheck Illumination Enable 1, 0 0
illusource Illumination Source right, left, both right
illucompare Illumination Compare higher, lower higher
illulux Illumination Level (String constant) 100.0
illuaction Illumination Action first, every first
Random Event (RD)
randomcheck Random Event Enable 1, 0 0
randomrange Events per Hour (String constant) 1.000
Event Counter (EC)
eventcounter_status Event Counter Enable enable, disable disable
eventcounter_mask Events to Count (event symbol list) *
eventcounter_filter Individual Events yes, no yes
eventcounter_time Counting Period 1 .. 3600 10
eventcounter_event Event Count 1 .. 3600 5
eventcounter_condition Condition more, less more
eventcounter_action Start Action first, every every
Sound on Event (SD)
playsound Sound Enable enable, disable disable
playsound_list Play List Alarm, Cuckooclock, Default, Standard  
playsound_sequence Playback Sequence randomize, ascending, descending randomize
playsound_alertmask Event Selection (event symbol list) *
Sound on Event (SD2)
playsound2 Sound Enable enable, disable disable
playsound2_list Play List Alarm, Cuckooclock, Default, Standard  
playsound2_sequence Playback Sequence randomize, ascending, descending randomize
playsound2_alertmask Event Selection (event symbol list) *
Signal Out Action (SO)
outputaction Signal Out Action 0, 1, 2, 5, 10, 30, 60, 300 0
outputaction_alertmask Event Selection (event symbol list) *
Phone Call-Out (CL)
callaction Phone Profile off, Zeitansage off
callaction_alertmask Event Selection (event symbol list) *
Second Phone Call-Out (CL2)
callaction2 Phone Profile off, Zeitansage off
callaction2_alertmask Event Selection (event symbol list) *
E-Mail Action (EM)
emailaction E-Mail Profile off, AlarmMail, NotifyMail, MailWithMxPEGClip, MailWithStoryImages, MailSystemStatus24 off
emailaction_alertmask Event Selection (event symbol list) *
Second E-Mail (EM2)
emailaction2 E-Mail Profile off, AlarmMail, NotifyMail, MailWithMxPEGClip, MailWithStoryImages, MailSystemStatus24 off
emailaction2_alertmask Event Selection (event symbol list) *
File Transfer Action (FT)
ftpaction FTP Profile off, FTP-Webcam, FTP-AlarmClip, FTP-Archiving, FTP-Day-Periode off
ftpaction_alertmask Event Selection (event symbol list) *
Second File Transfer (FT2)
ftpaction2 FTP Profile off, FTP-Webcam, FTP-AlarmClip, FTP-Archiving, FTP-Day-Periode off
ftpaction2_alertmask Event Selection (event symbol list) *
IP Notify (IP)
ipnotifyaction IP Notify Profile off, SimpleNotify, MultipleNotify, HttpRequest, HttpPostSysMsg24 off
ipnotify_alertmask Event Selection (event symbol list) *
Second IP Notify (IP2)
ipnotifyaction2 IP Notify Profile off, SimpleNotify, MultipleNotify, HttpRequest, HttpPostSysMsg24 off
ipnotify2_alertmask Event Selection (event symbol list) *
Right Softbutton (SBr)
softbutton1 Activate Softbutton 1, 0 1
softbuttonname1 Softbutton Name (String constant) Speak IP
Left Softbutton (SBl)
softbutton2 Activate Softbutton 1, 0 0
softbuttonname2 Softbutton Name (String constant) Actions disable
Visual Alarm (VA)
visualalarm Activate Visual Alarm enable, disable disable
visualalarm_alertmask Event Selection (event symbol list) *
visualalarm_format Visual Effect bar1, bar2, box1, box2, sign1, sign2 box1
visualalarm_color Effect Color 0x000000, 0x800000, 0x008000, 0x808000, 0x000080, 0x800080, 0x008080, 0x808080, 0xC0C0C0, 0xFF0000, 0x00FF00, 0xFFFF00, 0x0000FF, 0xFF00FF, 0x00FFFF, 0xFFFFFF 0xFF0000
visualalarm_erase Display Duration 0, 1, 5, 10, 30 10
visualalarm_acknowledge Alarm Acknowledge enable, disable enable
Arming
edactiv Arming enable, disable, close, open enable
edacttimetable Time Table Profile (No value), Weekdays_Mo-Fr, Weekend_Sa-So, Opening_Times, Closing_Times, MyCustomTimes  
Action Delay
actiondelay Action Delay 0 .. 3600 0
Event Dead Time
eventall_delay Event Dead Time 0 .. 3600 5
Event Dead Time
eventfilter_delay Event Dead Time 0 .. 3600 2
Event LED Setup
led_flash Flashing LEDs off, evt_evt, rec_evt rec_evt
led_blink Blinking LEDs off, gen_arm, gen_not_arm, rec_arm, rec_not_arm, rec_run, rec_dt, act_arm, act_not_arm, msg1_arm, msg1_not_arm, msg2_arm, msg2_not_arm rec_run
Action Profile
actions_activ Enable Action Profile enable, disable enable
actions_timetable Time Table Profile (No value), Weekdays_Mo-Fr, Weekend_Sa-So, Opening_Times, Closing_Times, MyCustomTimes  
actions_delay Action Dead Time 0 .. 3600 5
action_alertmask Event Selection (event symbol list) *
Message Profile
messaging_activ Enable Message Profile enable, disable enable
messaging_timetable Time Table Profile (No value), Weekdays_Mo-Fr, Weekend_Sa-So, Opening_Times, Closing_Times, MyCustomTimes  
notifydelay Messaging Dead Time 0 .. 3600 60
notify_alertmask Event Selection (event symbol list) *
Message Profile
messaging2_activ Enable Message Profile enable, disable enable
messaging2_timetable Time Table Profile (No value), Weekdays_Mo-Fr, Weekend_Sa-So, Opening_Times, Closing_Times, MyCustomTimes  
messaging2_delay Messaging Dead Time 0 .. 3600 60
messaging2_alertmask Event Selection (event symbol list) *
Arming
recording_activ Arm Recording enable, disable, close, open enable
recording_timetable Time Table Profile (No value), Weekdays_Mo-Fr, Weekend_Sa-So, Opening_Times, Closing_Times, MyCustomTimes  
Terminate Recording (TR)
freezeactiv Activate Terminate Recording off, on off
freeze_alertmask Termination Condition (event symbol list) UC
freezedelay Time Before Terminate 0 .. 86400 15
Recording (REC)
recording Recording Mode snapshot, streaming_event, streaming snapshot
storypacking Pack Event Story 1, 0 0
storyinterval Snap Shot Interval 0 .. 600000 1000
streamframerate100 Continuous Recording Frame Rate 0, 2500, 1200, 600, 400, 300, 200, 100, 50, 33, 25, 20 100
streameventframerate100 Event Frame Rate 0, 2500, 1200, 600, 400, 300, 200, 100, 50, 33, 25, 20 0
streamaudio Record Audio Data none, audio audio
Start Recording
recstartmask Start Recording (event symbol list) *
storyantecount Pre-Alarm Images 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 15, 20, 25, 30, 35, 40, 45, 50 1
storypostcount Post-Alarm Images 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 15, 20, 25, 30, 35, 40, 45, 50 2
streamantetime Recording Time Before Event 0, 1, 2 0
streamtime Recording Time 2, 4, 6, 8, 10, 20, 30, 40, 50, 60, 70, 80, 90, 120, 180, 300 10
recstretchmask Retrigger Recording (event symbol list)  
Stop Recording
recstopmask Stop Recording (event symbol list)  
storystopcount Images After Stop Event 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 15, 20, 25, 30, 35, 40, 45, 50 1
streamstoptime Recording Time After Stop Event 0, 2, 4, 6, 8, 10, 20, 30, 40, 50, 60, 70, 80, 90, 120, 180, 300 10
recstopdeadtime Recording Dead Time 0 .. 3600 5
History Recording (HR)
rechistory_sec History Recording Interval 0, TT, PE 0
rechistory_imgprof Image Profile for History (No value), MEGA, VGA, CIF  
Display Options
imageinfo Show Event/Action Symbols 0, 1, 2 1
chartdrawmode Level Meter off, bar, scrollchart off
chartdatasource Level Meter Data PI, MI, IL, SI, EC, TP PI
Object Tracing (OT)
objecttracing Enable Object Tracing disable, enable disable

Parameters for the exposurecontrol Section

Enter the following command to see all parameters for this section:
http://192.168.1.100/control/control?list&section=exposurecontrol

Parameter Name in Dialog Possible Values Default Value(s)
Night Improvement
ca_night_improve Enable Night Improvement auto, off, on auto auto
Lens F-Number
ca_lens_fnumber F-Number 0.8, 1.0, 1.4, 2.0, 2.4, 2.8, 3.5, 4.0 2.0 2.0
Exposure Field
ca_exp_window_type Measurement Field all, quarter, center, spot, top, middle, bottom, right, vertical, left, right_left, extra all all
ca_exp_window_weight Exposure Weighting -1, 0, 10, 20, 30, 40, 50, 60, 70, 80, 90, 100 100 100
ca_wbal_window_weight White Balance Weighting -1, 0, 10, 20, 30, 40, 50, 60, 70, 80, 90, 100 -1 -1
ca_avg_intensity Average Brightness 100, 150, 200, 250, 300, 350, 400, 450, 500, 550, 600, 650, 700, 750, 800 400 400
ca_exp_window_draw Show Field off, on, histogram_inside, histogram_outside, out_histogram_inside, out_histogram_outside, jpeg_histogram off off
Exposure Time
ca_exp_max Max. Exposure Time 160, 320, 640, 1280, 2560, 4960, 10080, 20000, 40000, 80000, 160000, 320000, 640000, 1280000 160000 160000
ca_exp_min Min. Exposure Time 160, 320, 640, 1280, 2560, 4960, 10080, 20000, 40000, 80000, 160000, 320000, 640000, 1280000 160 160
Frequency of Power Supply
ca_linefreq Line Frequency 50, 60 50

Parameters for the general Section

Enter the following command to see all parameters for this section:
http://192.168.1.100/control/control?list&section=general

Parameter Name in Dialog Possible Values Default Value(s)
Camera Selection
camera Camera Selection right, left, auto auto
Camera Night Switch (DY/NI)
nightswitch Night Camera Level 3, 6, 10, 185, 32, 56, 100, 170, 320, 560, 1000, 1800, 3200 100
nightswitchdelay Night Switch Delay 0, 1, 2, 3, 4, 5, 7, 10, 15, 20, 25, 30 5
Image Size
size Image Size 160x120, 320x240, 640x480, 1280x960, customize, 640x240 640x480
customsize Custom Size (String constant) 800x400
Digital Zoom
zoomlock Zoom Lock disable, enable disable
panlock Pan Lock disable, enable disable
panpos Pan Position (String constant) 0,0
Frames per Second
framerate100 Frame Rate 0, 2500, 2000, 1600, 1400, 1200, 1000, 800, 600, 400, 300, 200, 100, 50, 25, 10 2500
Mirror & Rotate Image
mirror Mirroring no, vertical, horizontal, both no no
rotate Rotation 0, 180 0 0
Sharpness
sharpen Sharpness 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10 4 4
Noise Suppress
darknoisesuppress Noise Suppress off, low, medium, high low low
Obscure Image Area (OA)
coverimage Obscure Image Enable enable, disable disable
coverimage_timetable Obscure Image Time Table (No value), Weekdays_Mo-Fr, Weekend_Sa-So, Opening_Times, Closing_Times, MyCustomTimes  
coverimage_area Obscure Image Area (Multiline string constant) 0,540,380,200,200,2

Parameters for the exposure Section

Enter the following command to see all parameters for this section:
http://192.168.1.100/control/control?list&section=exposure

Parameter Name in Dialog Possible Values Default Value(s)
Automatic Contrast
automatic Automatic Contrast off, auto auto auto
Brightness
brightness Brightness -10, -9, -8, -7, -6, -5, -4, -3, -2, -1, 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10 0 0
Backlight Correction
backlight Backlight -10, -9, -8, -7, -6, -5, -4, -3, -2, -1, 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10 4 4
Night Improvement
ca_night_improve Enable Night Improvement auto, off, on auto auto
Lens F-Number
ca_lens_fnumber F-Number 0.8, 1.0, 1.4, 2.0, 2.4, 2.8, 3.5, 4.0 2.0 2.0
Exposure Field
ca_exp_window_type Measurement Field all, quarter, center, spot, top, middle, bottom, right, vertical, left, right_left, extra all all
ca_exp_window_weight Exposure Weighting -1, 0, 10, 20, 30, 40, 50, 60, 70, 80, 90, 100 100 100
ca_wbal_window_weight White Balance Weighting -1, 0, 10, 20, 30, 40, 50, 60, 70, 80, 90, 100 -1 -1
ca_avg_intensity Average Brightness 100, 150, 200, 250, 300, 350, 400, 450, 500, 550, 600, 650, 700, 750, 800 400 400
ca_exp_window_draw Show Field off, on, histogram_inside, histogram_outside, out_histogram_inside, out_histogram_outside, jpeg_histogram off off
Exposure Time
ca_exp_max Max. Exposure Time 160, 320, 640, 1280, 2560, 4960, 10080, 20000, 40000, 80000, 160000, 320000, 640000, 1280000 160000 160000
ca_exp_min Min. Exposure Time 160, 320, 640, 1280, 2560, 4960, 10080, 20000, 40000, 80000, 160000, 320000, 640000, 1280000 160 160
Frequency of Power Supply
ca_linefreq Line Frequency 50, 60 50

Parameters for the color Section

Enter the following command to see all parameters for this section:
http://192.168.1.100/control/control?list&section=color

Parameter Name in Dialog Possible Values Default Value(s)
Color Profile
colorprofile Color Profile auto, Neontube, Cloudy, Sunny, Outdoor auto
Color Saturation
color Color Saturation -10, -9, -8, -7, -6, -5, -4, -3, -2, -1, 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10 0 0
Blue Balance
blue Blue Balance -10, -9, -8, -7, -6, -5, -4, -3, -2, -1, 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10 0 0
Red Balance
red Red Balance -10, -9, -8, -7, -6, -5, -4, -3, -2, -1, 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10 0 0

Parameters for the jpeg Section

Enter the following command to see all parameters for this section:
http://192.168.1.100/control/control?list&section=jpeg

Parameter Name in Dialog Possible Values Default Value(s)
MxPEG
motionjpeg MxPEG disable, enable enable
JPEG Quality
quality JPEG Quality 10, 20, 30, 40, 50, 60, 70, 80, 90 70
JPEG User Comment
jpegcommentuser JPEG User Comment (String constant)  
JPEG Comment Text (CT)
jpegcomment_ctx Comment Text Rows 0 .. 16 1

Parameters for the text Section

Enter the following command to see all parameters for this section:
http://192.168.1.100/control/control?list&section=text

Parameter Name in Dialog Possible Values Default Value(s)
Text Display
textdisplay Text Display disable, enable, datetime enable
textbgcolor Background Color 0x000000, 0x800000, 0x008000, 0x808000, 0x000080, 0x800080, 0x008080, 0x808080, 0xC0C0C0, 0xFF0000, 0x00FF00, 0xFFFF00, 0x0000FF, 0xFF00FF, 0x00FFFF, 0xFFFFFF 0x000000
textbgopacity Background Opacity 0, 25, 50, 75, 100 0
date Date and Time 0, 1, 2, 3, 4, 5, 6 1
print Comment (Multiline string constant) WWW.MOBOTIX.COM
errortext Error Messages 0, 1 1
stitchmode Cover Borders off, left_top left_top
Display Options
imageinfo Show Event/Action Symbols 0, 1, 2 1
chartdrawmode Level Meter off, bar, scrollchart off
chartdatasource Level Meter Data PI, MI, IL, SI, EC, TP PI
Object Tracing (OT)
objecttracing Enable Object Tracing disable, enable disable

Parameters for the settings Section

Enter the following command to see all parameters for this section:
http://192.168.1.100/control/control?list&section=settings

Parameter Name in Dialog Possible Values Default Value(s)
Arming
edactiv Arming enable, disable, close, open enable
edacttimetable Time Table Profile (No value), Weekdays_Mo-Fr, Weekend_Sa-So, Opening_Times, Closing_Times, MyCustomTimes  
Event LED Setup
led_flash Flashing LEDs off, evt_evt, rec_evt rec_evt
led_blink Blinking LEDs off, gen_arm, gen_not_arm, rec_arm, rec_not_arm, rec_run, rec_dt, act_arm, act_not_arm, msg1_arm, msg1_not_arm, msg2_arm, msg2_not_arm rec_run

Parameters for the event Section

Enter the following command to see all parameters for this section:
http://192.168.1.100/control/control?list&section=event

Parameter Name in Dialog Possible Values Default Value(s)
Passive Infrared Detector (PI)
pircheck PIR Enable 1, 0 0
pir PIR Level 0 .. 100 50
Video Motion Window (VM)
motioncheck Video Motion Enable 1, 0 1
motion Video Motion Definitions (Multiline string constant) 0,540,380,200,200,20,25
motionwintype Video Motion Style off, on, highlight, passiv highlight
motionnightoff Video Motion Night Mode 0, 3, 6, 10, 18, 32, 56 0 0
Microphone (MI)
miccheck Microphone Enable 1, 0 0
mic Microphone Level 0 .. 100 50
micwidth Microphone Signal Width 50, 100, 150, 200, 250, 300, 400, 500, 750, 1000, 2000 50
Signal Input (SI)
inputswitch Signal Input off, close, open off
Signal CTS (SC)
inputcts Signal CTS off, close, open off
Signal DSR (SR)
inputdsr Signal DSR off, close, open off
Signal RxD (SX)
inputrxd Signal RxD off, close, open off
Periodic Event (PE)
timercheck Periodic Event Enable 1, 0 0
timerunit Periodic Time Unit sec, ms, Hz sec
timer Periodic Time Interval 0 .. 86400 60
Time Task (TT)
timetaskcheck Time Task 1, 0 1
User Click (UC)
userclick User Click 1, 0 1
Recording Begin (RB)
recbegincheck Recording Begin 1, 0 0
Recording End (RE)
recendcheck Recording End 1, 0 0
Recording History (RH)
rechistcheck Recording History 1, 0 0
Recording Terminate (RT)
rectermcheck Recording Terminate 1, 0 0
Buttons (BT)
buttoncheck Buttons Enable 1, 0 0
button Button Combination right, left, rightORleft, rightANDleft right
IR Remote Control (IR)
ircheck Remote Control Enable 1, 0 0
ircode Remote Control Code 0 0
IP Receive (RC)
ipreceivecheck IP Receive Enable 1, 0 0
ipreceiveport IP Receive Port 1 .. 65536 8000
ipreceivematch IP Receive Compare strcmp, regex strcmp
ipreceivemessage IP Receive Message (String constant)  
COM In (CI)
comincheck COM In Enable 1, 0 0
cominmatch COM In Compare strcmp, regex, binary strcmp
cominmessage COM In Message (String constant)  
Temperature (TP)
tempcheck Temperature Enable 1, 0 0
tempsource Temperature Sensor intern intern
tempcompare Temperature Compare higher, lower higher
templevel Temperature Level (String constant) 50.0
tempunit Temperature Unit Celcius, Fahrenheit Celcius
tempaction Temperature Action first, every first
Illumination (IL)
illucheck Illumination Enable 1, 0 0
illusource Illumination Source right, left, both right
illucompare Illumination Compare higher, lower higher
illulux Illumination Level (String constant) 100.0
illuaction Illumination Action first, every first
Random Event (RD)
randomcheck Random Event Enable 1, 0 0
randomrange Events per Hour (String constant) 1.000
Event Counter (EC)
eventcounter_status Event Counter Enable enable, disable disable
eventcounter_mask Events to Count (event symbol list) *
eventcounter_filter Individual Events yes, no yes
eventcounter_time Counting Period 1 .. 3600 10
eventcounter_event Event Count 1 .. 3600 5
eventcounter_condition Condition more, less more
eventcounter_action Start Action first, every every
Sound on Event (SD)
playsound Sound Enable enable, disable disable
playsound_list Play List Alarm, Cuckooclock, Default, Standard  
playsound_sequence Playback Sequence randomize, ascending, descending randomize
playsound_alertmask Event Selection (event symbol list) *
Sound on Event (SD2)
playsound2 Sound Enable enable, disable disable
playsound2_list Play List Alarm, Cuckooclock, Default, Standard  
playsound2_sequence Playback Sequence randomize, ascending, descending randomize
playsound2_alertmask Event Selection (event symbol list) *
Signal Out Action (SO)
outputaction Signal Out Action 0, 1, 2, 5, 10, 30, 60, 300 0
outputaction_alertmask Event Selection (event symbol list) *
Phone Call-Out (CL)
callaction Phone Profile off, Zeitansage off
callaction_alertmask Event Selection (event symbol list) *
Second Phone Call-Out (CL2)
callaction2 Phone Profile off, Zeitansage off
callaction2_alertmask Event Selection (event symbol list) *
E-Mail Action (EM)
emailaction E-Mail Profile off, AlarmMail, NotifyMail, MailWithMxPEGClip, MailWithStoryImages, MailSystemStatus24 off
emailaction_alertmask Event Selection (event symbol list) *
Second E-Mail (EM2)
emailaction2 E-Mail Profile off, AlarmMail, NotifyMail, MailWithMxPEGClip, MailWithStoryImages, MailSystemStatus24 off
emailaction2_alertmask Event Selection (event symbol list) *
File Transfer Action (FT)
ftpaction FTP Profile off, FTP-Webcam, FTP-AlarmClip, FTP-Archiving, FTP-Day-Periode off
ftpaction_alertmask Event Selection (event symbol list) *
Second File Transfer (FT2)
ftpaction2 FTP Profile off, FTP-Webcam, FTP-AlarmClip, FTP-Archiving, FTP-Day-Periode off
ftpaction2_alertmask Event Selection (event symbol list) *
IP Notify (IP)
ipnotifyaction IP Notify Profile off, SimpleNotify, MultipleNotify, HttpRequest, HttpPostSysMsg24 off
ipnotify_alertmask Event Selection (event symbol list) *
Second IP Notify (IP2)
ipnotifyaction2 IP Notify Profile off, SimpleNotify, MultipleNotify, HttpRequest, HttpPostSysMsg24 off
ipnotify2_alertmask Event Selection (event symbol list) *
Right Softbutton (SBr)
softbutton1 Activate Softbutton 1, 0 1
softbuttonname1 Softbutton Name (String constant) Speak IP
Left Softbutton (SBl)
softbutton2 Activate Softbutton 1, 0 0
softbuttonname2 Softbutton Name (String constant) Actions disable
Visual Alarm (VA)
visualalarm Activate Visual Alarm enable, disable disable
visualalarm_alertmask Event Selection (event symbol list) *
visualalarm_format Visual Effect bar1, bar2, box1, box2, sign1, sign2 box1
visualalarm_color Effect Color 0x000000, 0x800000, 0x008000, 0x808000, 0x000080, 0x800080, 0x008080, 0x808080, 0xC0C0C0, 0xFF0000, 0x00FF00, 0xFFFF00, 0x0000FF, 0xFF00FF, 0x00FFFF, 0xFFFFFF 0xFF0000
visualalarm_erase Display Duration 0, 1, 5, 10, 30 10
visualalarm_acknowledge Alarm Acknowledge enable, disable enable
Arming
edactiv Arming enable, disable, close, open enable
edacttimetable Time Table Profile (No value), Weekdays_Mo-Fr, Weekend_Sa-So, Opening_Times, Closing_Times, MyCustomTimes  
Action Delay
actiondelay Action Delay 0 .. 3600 0
Event Dead Time
eventall_delay Event Dead Time 0 .. 3600 5
Event Dead Time
eventfilter_delay Event Dead Time 0 .. 3600 2
Event LED Setup
led_flash Flashing LEDs off, evt_evt, rec_evt rec_evt
led_blink Blinking LEDs off, gen_arm, gen_not_arm, rec_arm, rec_not_arm, rec_run, rec_dt, act_arm, act_not_arm, msg1_arm, msg1_not_arm, msg2_arm, msg2_not_arm rec_run
Action Profile
actions_activ Enable Action Profile enable, disable enable
actions_timetable Time Table Profile (No value), Weekdays_Mo-Fr, Weekend_Sa-So, Opening_Times, Closing_Times, MyCustomTimes  
actions_delay Action Dead Time 0 .. 3600 5
action_alertmask Event Selection (event symbol list) *
Message Profile
messaging_activ Enable Message Profile enable, disable enable
messaging_timetable Time Table Profile (No value), Weekdays_Mo-Fr, Weekend_Sa-So, Opening_Times, Closing_Times, MyCustomTimes  
notifydelay Messaging Dead Time 0 .. 3600 60
notify_alertmask Event Selection (event symbol list) *
Message Profile
messaging2_activ Enable Message Profile enable, disable enable
messaging2_timetable Time Table Profile (No value), Weekdays_Mo-Fr, Weekend_Sa-So, Opening_Times, Closing_Times, MyCustomTimes  
messaging2_delay Messaging Dead Time 0 .. 3600 60
messaging2_alertmask Event Selection (event symbol list) *
Arming
recording_activ Arm Recording enable, disable, close, open enable
recording_timetable Time Table Profile (No value), Weekdays_Mo-Fr, Weekend_Sa-So, Opening_Times, Closing_Times, MyCustomTimes  
Terminate Recording (TR)
freezeactiv Activate Terminate Recording off, on off
freeze_alertmask Termination Condition (event symbol list) UC
freezedelay Time Before Terminate 0 .. 86400 15
Recording (REC)
recording Recording Mode snapshot, streaming_event, streaming snapshot
storypacking Pack Event Story 1, 0 0
storyinterval Snap Shot Interval 0 .. 600000 1000
streamframerate100 Continuous Recording Frame Rate 0, 2500, 1200, 600, 400, 300, 200, 100, 50, 33, 25, 20 100
streameventframerate100 Event Frame Rate 0, 2500, 1200, 600, 400, 300, 200, 100, 50, 33, 25, 20 0
streamaudio Record Audio Data none, audio audio
Start Recording
recstartmask Start Recording (event symbol list) *
storyantecount Pre-Alarm Images 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 15, 20, 25, 30, 35, 40, 45, 50 1
storypostcount Post-Alarm Images 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 15, 20, 25, 30, 35, 40, 45, 50 2
streamantetime Recording Time Before Event 0, 1, 2 0
streamtime Recording Time 2, 4, 6, 8, 10, 20, 30, 40, 50, 60, 70, 80, 90, 120, 180, 300 10
recstretchmask Retrigger Recording (event symbol list)  
Stop Recording
recstopmask Stop Recording (event symbol list)  
storystopcount Images After Stop Event 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 15, 20, 25, 30, 35, 40, 45, 50 1
streamstoptime Recording Time After Stop Event 0, 2, 4, 6, 8, 10, 20, 30, 40, 50, 60, 70, 80, 90, 120, 180, 300 10
recstopdeadtime Recording Dead Time 0 .. 3600 5
History Recording (HR)
rechistory_sec History Recording Interval 0, TT, PE 0
rechistory_imgprof Image Profile for History (No value), MEGA, VGA, CIF  
Display Options
imageinfo Show Event/Action Symbols 0, 1, 2 1
chartdrawmode Level Meter off, bar, scrollchart off
chartdatasource Level Meter Data PI, MI, IL, SI, EC, TP PI
Object Tracing (OT)
objecttracing Enable Object Tracing disable, enable disable

Parameters for the eventfilter Section

Enter the following command to see all parameters for this section:
http://192.168.1.100/control/control?list&section=eventfilter

Parameter Name in Dialog Possible Values Default Value(s)
Event Dead Time
eventfilter_delay Event Dead Time 0 .. 3600 2
Event Counter (EC)
eventcounter_status Event Counter Enable enable, disable disable
eventcounter_mask Events to Count (event symbol list) *
eventcounter_filter Individual Events yes, no yes
eventcounter_time Counting Period 1 .. 3600 10
eventcounter_event Event Count 1 .. 3600 5
eventcounter_condition Condition more, less more
eventcounter_action Start Action first, every every

Parameters for the recording Section

Enter the following command to see all parameters for this section:
http://192.168.1.100/control/control?list&section=recording

Parameter Name in Dialog Possible Values Default Value(s)
Arming
recording_activ Arm Recording enable, disable, close, open enable
recording_timetable Time Table Profile (No value), Weekdays_Mo-Fr, Weekend_Sa-So, Opening_Times, Closing_Times, MyCustomTimes  
Terminate Recording (TR)
freezeactiv Activate Terminate Recording off, on off
freeze_alertmask Termination Condition (event symbol list) UC
freezedelay Time Before Terminate 0 .. 86400 15
Recording (REC)
recording Recording Mode snapshot, streaming_event, streaming snapshot
storypacking Pack Event Story 1, 0 0
storyinterval Snap Shot Interval 0 .. 600000 1000
streamframerate100 Continuous Recording Frame Rate 0, 2500, 1200, 600, 400, 300, 200, 100, 50, 33, 25, 20 100
streameventframerate100 Event Frame Rate 0, 2500, 1200, 600, 400, 300, 200, 100, 50, 33, 25, 20 0
streamaudio Record Audio Data none, audio audio
Start Recording
recstartmask Start Recording (event symbol list) *
storyantecount Pre-Alarm Images 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 15, 20, 25, 30, 35, 40, 45, 50 1
storypostcount Post-Alarm Images 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 15, 20, 25, 30, 35, 40, 45, 50 2
streamantetime Recording Time Before Event 0, 1, 2 0
streamtime Recording Time 2, 4, 6, 8, 10, 20, 30, 40, 50, 60, 70, 80, 90, 120, 180, 300 10
recstretchmask Retrigger Recording (event symbol list)  
Stop Recording
recstopmask Stop Recording (event symbol list)  
storystopcount Images After Stop Event 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 15, 20, 25, 30, 35, 40, 45, 50 1
streamstoptime Recording Time After Stop Event 0, 2, 4, 6, 8, 10, 20, 30, 40, 50, 60, 70, 80, 90, 120, 180, 300 10
recstopdeadtime Recording Dead Time 0 .. 3600 5
History Recording (HR)
rechistory_sec History Recording Interval 0, TT, PE 0
rechistory_imgprof Image Profile for History (No value), MEGA, VGA, CIF  

Parameters for the action Section

Enter the following command to see all parameters for this section:
http://192.168.1.100/control/control?list&section=action

Parameter Name in Dialog Possible Values Default Value(s)
Action Profile
actions_activ Enable Action Profile enable, disable enable
actions_timetable Time Table Profile (No value), Weekdays_Mo-Fr, Weekend_Sa-So, Opening_Times, Closing_Times, MyCustomTimes  
actions_delay Action Dead Time 0 .. 3600 5
action_alertmask Event Selection (event symbol list) *
Signal Out Action (SO)
outputaction Signal Out Action 0, 1, 2, 5, 10, 30, 60, 300 0
File Transfer Action (FT)
ftpaction FTP Profile off, FTP-Webcam, FTP-AlarmClip, FTP-Archiving, FTP-Day-Periode off
Visual Alarm (VA)
visualalarm Activate Visual Alarm enable, disable disable
visualalarm_format Visual Effect bar1, bar2, box1, box2, sign1, sign2 box1
visualalarm_color Effect Color 0x000000, 0x800000, 0x008000, 0x808000, 0x000080, 0x800080, 0x008080, 0x808080, 0xC0C0C0, 0xFF0000, 0x00FF00, 0xFFFF00, 0x0000FF, 0xFF00FF, 0x00FFFF, 0xFFFFFF 0xFF0000
visualalarm_erase Display Duration 0, 1, 5, 10, 30 10
visualalarm_acknowledge Alarm Acknowledge enable, disable enable

Parameters for the message Section

Enter the following command to see all parameters for this section:
http://192.168.1.100/control/control?list&section=message

Parameter Name in Dialog Possible Values Default Value(s)
Message Profile
messaging_activ Enable Message Profile enable, disable enable
messaging_timetable Time Table Profile (No value), Weekdays_Mo-Fr, Weekend_Sa-So, Opening_Times, Closing_Times, MyCustomTimes  
notifydelay Messaging Dead Time 0 .. 3600 60
notify_alertmask Event Selection (event symbol list) *
Sound on Event (SD)
playsound Sound Enable enable, disable disable
playsound_list Play List Alarm, Cuckooclock, Default, Standard  
playsound_sequence Playback Sequence randomize, ascending, descending randomize
E-Mail Action (EM)
emailaction E-Mail Profile off, AlarmMail, NotifyMail, MailWithMxPEGClip, MailWithStoryImages, MailSystemStatus24 off
Phone Call-Out (CL)
callaction Phone Profile off, Zeitansage off
IP Notify (IP)
ipnotifyaction IP Notify Profile off, SimpleNotify, MultipleNotify, HttpRequest, HttpPostSysMsg24 off

Parameters for the message2 Section

Enter the following command to see all parameters for this section:
http://192.168.1.100/control/control?list&section=message2

Parameter Name in Dialog Possible Values Default Value(s)
Message Profile
messaging2_activ Enable Message Profile enable, disable enable
messaging2_timetable Time Table Profile (No value), Weekdays_Mo-Fr, Weekend_Sa-So, Opening_Times, Closing_Times, MyCustomTimes  
messaging2_delay Messaging Dead Time 0 .. 3600 60
messaging2_alertmask Event Selection (event symbol list) *
Second File Transfer (FT2)
ftpaction2 FTP Profile off, FTP-Webcam, FTP-AlarmClip, FTP-Archiving, FTP-Day-Periode off
Sound on Event (SD2)
playsound2 Sound Enable enable, disable disable
playsound2_list Play List Alarm, Cuckooclock, Default, Standard  
playsound2_sequence Playback Sequence randomize, ascending, descending randomize
Second E-Mail (EM2)
emailaction2 E-Mail Profile off, AlarmMail, NotifyMail, MailWithMxPEGClip, MailWithStoryImages, MailSystemStatus24 off
Second Phone Call-Out (CL2)
callaction2 Phone Profile off, Zeitansage off
Second IP Notify (IP2)
ipnotifyaction2 IP Notify Profile off, SimpleNotify, MultipleNotify, HttpRequest, HttpPostSysMsg24 off

Parameters for the signalout Section

Enter the following command to see all parameters for this section:
http://192.168.1.100/control/control?list&section=signalout

Parameter Name in Dialog Possible Values Default Value(s)
Signal Out Arming
so_activ Activate Enhanced Signal Out enable, disable disable
so_acttimetable Time Table Profile (No value), Weekdays_Mo-Fr, Weekend_Sa-So, Opening_Times, Closing_Times, MyCustomTimes  
Signal Out Switch Time
so_time Switch Time 0 .. 86400 60
Signal Out Dead time
so_deadtime Dead Time 0 .. 3600 10
Display Options
so_imageinfo Show Event Symbols 1, 0 0
Illumination
so_illicheck Illumination Filter off, greater, lower off
so_illilux Level (String constant) 100.0
Passive Infrared Detector (PI)
so_pircheck PIR Enable 1, 0 0
so_pir PIR Level 0 .. 100 50
Video Motion Window (VM)
so_motioncheck Video Motion Enable 1, 0 0
Microphone (MI)
so_miccheck Microphone Enable 1, 0 0
Signal Input (SI)
so_inputswitch Signal Input off, close, open off
Periodic Event (PE)
so_timercheck Periodic Event Enable 1, 0 0
so_timer Periodic Time Interval 0 .. 86400 60
Time Task (TT)
so_timetaskclick Time Task 1, 0 0
User Click (UC)
so_userclick User Click 1, 0 0
Buttons (BT)
so_buttoncheck Buttons Enable 1, 0 0
so_button Button Combination right, left, rightORleft, rightANDleft right
IR Remote Control (IR)
so_ircheck Remote Control Enable 1, 0 0
IP Receive (RC)
so_ipreceivecheck IP Receive Enable 1, 0 0
COM In (CI)
so_comincheck COM In Enable 1, 0 0
Temperature (TP)
so_tempcheck Temperature Enable 1, 0 0
Random Event (RD)
so_randomcheck Random Event Enable 1, 0 0
so_randomrange Events per Hour (String constant) 1.000

Parameters for the mxpegparam Section

Enter the following command to see all parameters for this section:
http://192.168.1.100/control/control?list&section=mxpegparam

Parameter Name in Dialog Possible Values Default Value(s)
Camera Selection
camera Camera Selection right, left, auto auto
Image Size
size Image Size 160x120, 320x240, 640x480, 1280x960, customize, 640x240 640x480
Frames per Second
framerate100 Frame Rate 0, 2500, 2000, 1600, 1400, 1200, 1000, 800, 600, 400, 300, 200, 100, 50, 25, 10 2500
Brightness
brightness Brightness -10, -9, -8, -7, -6, -5, -4, -3, -2, -1, 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10 0 0
Sharpness
sharpen Sharpness 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10 4 4
JPEG Quality
quality JPEG Quality 10, 20, 30, 40, 50, 60, 70, 80, 90 70
MxPEG
motionjpeg MxPEG disable, enable enable
mxpeg_cyclic Cyclic Image Refresh 0 .. 100 8
mxpeg_delta Delta of Change 0 .. 100 0
mxpeg_minchange Minimum MCU Change 0 .. 100 10
mxpeg_sw2full Switch to Full Image 0 .. 100 60
Exposure Field
ca_exp_window_type Measurement Field all, quarter, center, spot, top, middle, bottom, right, vertical, left, right_left, extra all all
ca_exp_window_draw Show Field off, on, histogram_inside, histogram_outside, out_histogram_inside, out_histogram_outside, jpeg_histogram off off

Parameters for the quickcontrol Section

Enter the following command to see all parameters for this section:
http://192.168.1.100/control/control?list&section=quickcontrol

Parameter Name in Dialog Possible Values Default Value(s)
Camera Selection
camera Camera Selection right, left, auto auto
Image Size
size Image Size 160x120, 320x240, 640x480, 1280x960, customize, 640x240 640x480
Brightness
brightness Brightness -10, -9, -8, -7, -6, -5, -4, -3, -2, -1, 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10 0 0
Backlight Correction
backlight Backlight -10, -9, -8, -7, -6, -5, -4, -3, -2, -1, 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10 4 4
Color Saturation
color Color Saturation -10, -9, -8, -7, -6, -5, -4, -3, -2, -1, 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10 0 0
Sharpness
sharpen Sharpness 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10 4 4
JPEG Quality
quality JPEG Quality 10, 20, 30, 40, 50, 60, 70, 80, 90 70
Exposure Field
ca_exp_window_type Measurement Field all, quarter, center, spot, top, middle, bottom, right, vertical, left, right_left, extra all all
ca_exp_window_draw Show Field off, on, histogram_inside, histogram_outside, out_histogram_inside, out_histogram_outside, jpeg_histogram off off

The rcontrol Command

The first value expected by the script is always the name of the action that is to be performed. Depending on the action, you may have to provide additional parameters. For the additional parameters mandatory and optional parameters are used.

Note:

In order to see all options for the rcontrol command, enter the list instruction in your browser's address bar:
http://192.168.1.100/control/rcontrol?list.

Parameters of rcontrol

Action Description Mandatory parameter Optional parameter
sigouthigh The signal output is closed. The optional time parameter reopens the signal output after the defined period of time has passed. none
time
Period of time in seconds
sigoutlow The signal output is opened. The optional time parameter closes the signal output again after the defined period of time has passed. none
time
Period of time in seconds
sound Plays the boing audio file. Using the optional parameter soundfile, you can specify an audio file. You can either use one of the audio files provided in the software or any audio file that you have recorded in the Manage Voice Messages dialog. none
soundfile
Name of the audio file
ledson Switches all LEDs on. The optional time parameter resets the LEDs to the factory default settings after the specified period of time has passed. none
time
Period of time in seconds
ledsoff Switches all LEDs off. The optional time parameter resets the LEDs to the factory default settings after the specified period of time has passed. none
time
Period of time in seconds
ledsdefault Resets all LEDs to the factory defaults. The optional time parameter resets the LEDs to the previous settings after the specified period of time has passed. none time
ledsstring You can explicitly change the state of every single LED. You only need the leds parameter. This parameter expects a string consisting of six characters, with each character defining the state of one LED. The characters are allocated clockwise with the first character allocated to the LED at 12 o'clock.
Example: http://192.168.1.100/
    control/rcontrol?
    action=ledsstring
    &leds=01BD11

leds

0=LED off
1=LED on
B=LED blinking
D=Default state of the LEDs
time
Period of time in seconds
irledson Switches all infrared LEDs on. The optional time parameter switches all LEDs off again after the specified period of time has passed. none
time
Period of time in seconds
irledsoff Switches all infrared LEDs off. none none
irledsstring

You can explicitly change the state of the infrared LEDs for each side. You only need the leds parameter. This parameter expects a string consisting of two characters, with each character defining the state of one infrared LED bar. The first character of the string controls the state of the right LED bar, the second character controls the state of the left LED bar.

Example:
http://192.168.1.100/
    control/rcontrol?
    action=ledsstring
    &leds=01

leds

0=LED off
1=LED on
time
Period of time in seconds
defreeze Unlocks the camera after a Stop Action (SP) event has occurred and resumes image recording. none none
putrs232 Send text via the serial interface When you do not set the rs232outtext parameter, all that is transferred are the words "hello world". none
rs232outtext
string
getrs232 Read text from the serial interface. When you do not use any other parameters, only the last 2048 bytes are read from the buffer. none
nrofbytes
0 .. 102400 bytes
rs232delafterread
Delete buffer after reading
getrs232hex Similar to the getrs232 function, the only difference being that the characters are returned in hex code. none same as getrs232
userclick Performs the User Click function. none none
pancenter Sets the position of the zoomed image section to the center of the visible image. none none
gettemp Returns the internal temperature of the camera.
Note:
This command is not available for Web and Basic models.
none none
rs232sigin Returns the state of pin 9 of the serial interface none none
setrs232sig Sets the pins of the serial interface. Make sure that the serial interface has been configured correctly in the Serial Interface and Modem Setup dialog.
24V 0, 1
RTS 0, 1
TXD 0, 1
DTR 0, 1
none
ftplastevent Transfers the last stored alarm image via FTP. Expects the name of an FTP profile as additional information. The profile must have been defined in the FTP Profiles dialog.
profile
Profile name
none
ftpcurrent Transfers the current image via FTP. Expects the name of an FTP profile as additional information. The profile must have been defined in the FTP Profiles dialog.
profile
Profile name
none
emaillastevent Transfers the last stored alarm image via e-mail. Expects the name of an e-mail profile as additional information. The profile must have been defined in the E-Mail Profiles dialog.
profile
Profile name
none
emailcurrent Transfers the current image via e-mail. Expects the name of an e-mail profile as additional information. The profile must have been defined in the E-Mail Profiles dialog.
profile
Profile name
none
notifylastevent Sends a network message with the status of the latest event image.
profile
Profile name
none
notifycurrent Sends a network message with the status of the current image.
profile
Profile name
none
sendmessage Sends an IP notification to the defined address
Note:
This command is not available for Web and Basic models.
message String
addr ip-address:port
none
actionactivityon Activates all actions none none
actionactivityoff Deactivates all actions none none
actionactivitytime Activates all actions for the period of time defined in the General Event Settings dialog. none none
eventack Acknowledges an alarm. none none
isdnphone Triggers a camera voice message via telephone. Expects the name of a profile defined in Phone Profiles as additional information.
profile
Profile name
none
speakip Plays back the current IP address via the loudspeaker.

Note:
This command is not available for Web and Basic models.

none none

Saving and Restoring the Configuration

Functions for saving and restoring the configuration can only be performed by a user of the admin access level.

Example: http://192.168.1.100/admin/rcontrol?action=storeconfig
Note: These commands are not available for Web and Basic models.

Functions for Users of the admin level

Function Description Mandatory parameter Optional parameter
storeconfig Stores the current configuration in the camera's permanent storage. none none
restoreconfig Restores the last saved configuration from the camera's permanent storage. none none
resetconfig Reads the camera's factory default settings. none none
reboot Reboots the camera. none none

Altre lingue: en, it

©2001-2017 MOBOTIX AG, Germany · http://www.mobotix.com/